Well for quite some time I have not posted any solutions, due to alot of facts which I wont go into details on now
Anyway today we gonna solve the E710 "Insert SIM" fault, very easy to repair.
Tools needed for this fix :
1 : Soldering Iron 30 - 50 Watt with SMD tip.
2 : Good flux, I recommend ERSA - FMKANC32-005 non-clean *****.
3 : Soldering tin 1.5 - 2 mm with core flux.
4 : Thin patch wire insulated !
The problem occurs normally around the IC called U100, the function is actually power module/led driver and RS232 between the Sim Reader and CPU !
I've had too many with broken lines from Sim Reader to U100
Lets fix the bugger
Here you see the area we have to work on, to find the correct leg, start from top left side of U100 and start counting counter clockwise untill you reach leg 48-49-50 and 51, you can see in this picture where the pacth wire is located so you have an idea where it is
On the next pic here you see the "work area" magnified to 60x. Now the red numbers corresspond to U100 leg numbers, while THIS CYAN is what legs on the SIM Reader they are connected to
On the last pic here you see the SIM Reader legs and their numbers, in red you have the leg numbers on U100, so just measure if you have all 4 lines ok, if not you have found the fault
Well thats it for this time
More coming up soon in Samsung hardware repair area
Hope this helps out some folks. Good luck, and dont blame me for busted boards, do this at you own risk !
And please, do not start any "send me too" posts of any kind, they will be deleted. I do not have it whatever it might be. For your information I use a Novex AP-8 stereo microscope, and pictures posted here is taken with a QX3 Intel (tm) digital toy microscope, you can find those nice little ones on Ebay for around 60 Euro.
OBS ! Edit 16/9-2005
Solution for E700 will come as soon as I get a E700 board and can take some pictures. Power supply IC here is called U400, and have a different wirering..
And please, DO NOT start 1 line thank you posts, I WILL delete them, its waste of our server space, post only if you have anything additional which is directly related to this fault, or if you have found other solutions than this.
You may rate the thread instead of posting thankyou post or you can choose to make a vote on the poll on top of this page !
No comments:
Post a Comment