Karbonn K34 Star SPD SC6531 Read Flash Success With Volcano Tool V2.9.2

Karbonn K34* read flash done with volcano tool v2.9.2, Karbonn K34 Star which has SPD Chip set SC6531 and can be read flash and format with volcano tool. The below is the complete tutorial how to read flash and format SC6531 Karbonn K34Star.

Before you format SC6531, first back up the flash file by read flash and then select read flash file and format. To operate SC6531 please use higher version of Volcano tool, as on February 2015 the latest version of Volcano tool is v2.9.2.

Karbonn K34 Star Read Flash Volcano Tool V2.9.2

• Open volcano tool/utility


• Go to SPD tab


• Select Boot 15 SC6531 Only


• Click on Start

Karbonn K34 Star SPD SC6531 Read Flash Done With Volcano Tool V2.9.2

Karbonn K34* Read Flash Volcano Tool Log File:

Detection initiated…
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-…
  D+ = 3, D- = 2
  Detection D+/D- with 1.22 seconds.
  Continue to detect BOOT pin…
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  BOOT(Pull Down) = 4
  Setting…
  Find USB device:SCI USB2Serial (COM12), (VID_1782&PID_4D00)
  Pinouts setting complete!
   
   
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment….
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310001]  FLASH ID: 00C8006000160000
  Flash Type: SF_GD25LQ32               
  Size:0x400000(4MB)
  Reading completed.