Karbonn K53 SC6531 CPU Format Done With Volcano Tool V3.0.2

How to flash the firmware of Karbonn K53? which has SPD SC6531 CPU. Now you can flash Karbonn K53 SPD SC6531 using Volcano tool. Karbonn K53 Read flash and format done with volcano tool v3.0.2. The below is the process to flash the Karbonn K53 SC6531 with Volcano Utility.

Karbonn K53 Format Done With Volcano Tool

• Open volcano tool V3.0.2


• Go to SPD tab and choose SC6531 boot


• First Read flash and then Format


• Choose Format and Select the Flash File


• Click on Start


• Hold the left menu key

Karbonn K53 Boot Key = Left Menu Key

Karbonn K53 SC6531 CPU Format Done With Volcano Tool V3.0.2

Karbonn K53 Volcano Tool Log:

 Detection initiated…
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-…
  D+ = 3, D- = 2
  Detection D+/D- with 3.96 seconds.
  Continue to detect BOOT pin…
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
  Setting…
  Find USB device:SCI USB2Serial (COM189), (VID_1782&PID_4D00)
  Pinouts setting complete!
   
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment….
  Spreadtrum Boot Block version 1.2
  CPU TYPE:SC6531 [65310001]  FLASH ID: 00C8006000160000
  Flash Type: SF_GD25LQ32               
  Size:0x400000(4MB)
  Set to Factory successfully.