Ultrasn0w with Sn0wbreeze Unlock and Jailbreak iOS 5.1

There are a lot of different unlocks for iPhone on the web, but many of them are not working. Last time I wrote you how to guide where you can see iPhone unlocking method using Ultrasn0w 1.2.5. But today there is a new version of Sn0wbreeze 2.9.3 which is available for free.

Here you can find some tips and advices and requirements before you begin to jailbreak and unlock iOS 5.1 using Sn0wbreeze 2.9.3 and Ultrasn0w fixer.
After reading this article you can use our guide to jailbreak iOS 5.1 using Sn0wbreeze 2.9.3. Also after jailbreak you can unlock iOS 5.1 using Ultrasn0w fixer.
I also wrote you guide to jailbreak iOS 5.1 semi untethered using sn0wbreeze 2.9.2 so you can use it if you need however this sn0wbreeze iOS 5.1 jailbreak is tethered. But there is one exception. If your iPhone 3GS have an old bootrom than you can jailbreak iOS 5.1 untethered with sn0wbreeze 2.9.3.
And this jailbreaking method must be performed only on Windows and works only with old basebands such as:
04.26.08, 05.11.07, 05.12.01, 05.13.04, 06.15.00, 01.59.00;

In case you have Gevey card and 04.10.01 baseband then you can use this unlock for iOS 5.1. But if you are iPhone 4S user so don’t update to iOS 5.1 because you can’t make custom ipsw and unlock iPhone 4S with Gevey card.
Also you must download and install iBooty 2.3 each time when you reboot your iPhone as it is tethered jailbreak.
Those with 06.15.00 baseband can restore to iOS 5.1 and remove the terminal from Recovery mode using iBooty.
I hope this tips will help you to jailbreak iOS 5.1 (tethered) using Sn0wbreese 2.9.3 and then unlock iOS 5.1.

Read more »

Ultrasn0w Fixer To Unlock iOS 6.1 iPhone 4 and 3GS

As it was promised iPhone Dev team released new Ultrasn0w to unlock iOS 6.1 on iPhone 4, 3GS on old baseband. The method is very easy and I’ll show you how to do that quick.
If you use iPhone 4 baseband 04.11.08, 04.12.01 or 04.12.02 and 3GS new bootrom you can’t use Ultrasn0w tool. In this case try legit IMEI unlocking service to unlock iOS 6.1 firmware.
Less that a month ago third-party developers, msft.guy and zmaster, released Ultrasn0w fixer 6.1 which you can use after evasi0n jailbreak and many our visitors found useful our tutorial guide on how to use Ultrasn0w fixer 6.0. You can try these both methods. But before we start you should check the list of supported baseband.

Supported Ultrasn0w Fixer for iOS 6.1 Baseband

iPhone 4

• 01.59.00

iPhone 3GS

• 04.26.08
• 05.11.07
• 05.13.01
• 05.12.01o
• 06.15.00

So if you found your baseband in this list the last thing that you have to do is to update your device to iOS 6.1 preserving old baseband because if you don’t do that your iPhone iOS 6.1 baseband will update to the newer version and you will not be able to unlock it.
And the last thing, I promise. To complete preparation for iPhone 4, 3GS unlocking you have to jailbreak iOS 6.1 using evasi0n which is the best thing in all this. So, let’s start.

How to Use Ultrasn0w Fixer to Unlock iOS 6.1

Step 1. After jailbreak you need to install Ultrasn0w 6.1 package. To perform this open Cydia => Manage => Source => Edit=> Add this repo:

http://repo.iparelhos.com

Step 2. Go to Search,  find official Ultrasn0w Fixer 6.1 and install it.
Step 3. Go to Search again and install official Ultrasn0w 1.2.7. Download and Install adding this repo:

http://repo666.ultrasn0w.com

Step 4. After installation process you need to restart you iPhone.
Step 5. After device will reboot wait for the signal.
After you get the signal of your network your iPhone 4 and iPhone 3GS will be running Ultrasn0w fixer unlock iOS 6.1 device. Also don’t forget that you can find unlock for your iPhone 4 04.12.05 baseband.

Read more »

iPhone 5 will be released on Friday

Yes, iPhone 5 will be released in the late September, more precisely on Friday, 21 September, 2012. This rumor came from a French blog, App4Phone. Earlier today, we reported that next-gen iPhone will have a smaller 19 –pin dock connector. However, iMore also posted that Apple will also provide a standard 30-pin dock adaptor with the next-gen iPhone in order to connect your iDevice with older dock accessories.

Read more »

new iPod touch to match next iPhone’s taller display, add A5 chip and iPad-like shell

Quote:

Macotakara, the same publication to report on an iOS-inspired, taller iPod nano, claims that Apple is preparing an updated iPod touch for launch this fall. The site says that this new iPod touch will match the next-generation iPhone in providing a taller, four-inch display.

Quote:

Previously leaked next-generation iPod touch front-frame

Also reportedly on tap is the A5 processor from the iPhone 4S and a rear-shell that matches the iPad. The iPad sports a buffed aluminum shell, rather than shiny stainless steel like on the current iPod touch. A hole toward the bottom back of the device is also said to be present, but the report is unsure of the hole’s function. Perhaps it is a speaker, but that’s just speculation.

[ R ] [ N ] [ C ] [ _ ] [ E ] [ B ] [ M ]

[ iPhone4s-5.1.1 - FU / iPhone4-5.1.1 - Globe / iPhone4-5.1.1 - FU]

Read more »

15 interesting points from today’s earnings call

Apple just announced its financial results for Q3 2012, and is now finishing up its earnings call. As promised, we’ve collected a list of some of the more interesting bits from the call to pass on to you.
Among the list, is the fact that Apple added $7 billion to its growing cash pile last quarter, bringing its cash total to more than $117 billion. Also, there are now 410 million iOS devices in the wild…

• Apple now has $117 billion in cash
• iPod still accounts for more than 70% of mp3 player market
• 1.3 million Apple TVs sold last quarter
• 410 million iPhones, iPads and iPod touches in the wild
• 150 million iCloud users
• 650,000 apps in App Store
• $1.8 billion in iTunes sales last quarter
• 20 million songs downloaded last quarter
• $5.5 billion paid out to app developers to date
• App Store in 155 countries
• iPhone now on 250 carriers in more than 100 countries
• iPad available in 97 countries
• New Mac OS, OS X Mountain Lion, launches tomorrow
• $4.1 billion in retail sales
• 80.3 million retail store visitors

Apple’s overall iPhone sales and revenue numbers missed Wall Street’s projections, but the company says that it is still “extremely confident” in its strategy moving forward.
The company also made sure to note that it has some “amazing new products in the pipeline.” And if recent rumors are any indication, we could see a number of those this fall.

Read more »

Password requirement for free apps in iOS 6 seems to be erratic

Yesterday, we mentioned that several users were reporting that the latest version of iOS 6 beta was not requiring them to put in their passwords when downloading free apps.
The news spread quickly, but the assumption was premature. It appears that Apple has quickly reversed this behavior via a backend update, and the password requirement is back in place…
9to5Mac points out that it seems like something has changed, essentially overnight, in the way the App Store handles free app downloads. We can confirm this, as all attempts to download free apps this morning have prompted a request for a password entry.
TheNextWeb’s Matthew Panzarino notes that this behavior has already changed several times throughout the past month, so folks shouldn’t assume that anything is set in stone until iOS 6 goes public sometime later this year. Good advice.
Judging by the feedback yesterday, removing the password requirement for free apps would be a welcomed change in iOS 6. But apparently, Apple’s not quite ready to make that call just yet. And that, my friends, is why we jailbreak.
Are you still able to download free apps without a password?

Read more »

Apple News,Apple Rumors,Jailbreak News andRules

I think I was wrong about collecting news in one thread
Since some news maybe fake or some news is opened discussion, so I will close this thread for now
But before you post news or rumors in this section read


Making news thread rules:

* - Please Check Picture Size Before Posting it Otherwise it Will be Deleted
- Don't start thread with useless title better tag it like [NEWS].
-Don't post spam or advertise for your site as news thread.
-Make news thread only about apple and jailbreak and unlock news not factory unlocking services or unlocking sim.
Please check forum rules too

Read more »

Gecko iPhone Toolkit

dataprotection gui- supports reading passcode and reset 'iphone disabled' on some iphone/ipad models

Current Version: REV 01
In Co-operation With Platije
 The Following 109 Users Say Thank You to Gecko_UK For This Useful Post:

...:::SHAMIM:::..., .::M Irfan::., 3stanGsm, A-one mob, AbDoU_AbDoU, abouda5, agifrance, amdadsab, amin90, antoniolcrd, Applemobile66, ashamsu, Ashley 28, ask-unlock, atewsten, ayujahndon, azizbeyg, basqui, Bilal1984, c4m3l30ns, CHANDARAKK, D'xplorer, danishalnoor, dedeyk, delchoni, Digiview, Dimon_daemon, doctormobile14, Draover, dubai@mobile, DUNIYA JAMAL, eXcluzive, eyestrain, gadgetguyuk2005, garguantan, gsmhitter, gsmkiller173, gsmplus, Halims, heemd11, hva8, iNemesis_d, iphone.rif, Ipko, iran zamin, irfanboss, jayh42, josipluic, jr astigin, kher2k, kris88, ksz, kumar_gsm_kumar, leepswit, lezwire, liu01, lovelyboy, loydie, maciekbednarz, mandYpo, max0066, metdelta, miliky, mizmatch, mobileman999, MyHTCUnlock, n.nha, nasirahmed, Nathchad, ngomani, PHANITH, phuccnc9, pocs, rajabrotherscom, rasikh, RCACELLULAR, roby83, rock23, rogerboogie, rquilatan, s.niazi, S3pth666, saeedullah_khan, Saharatw, sajaldip, sandulxxx, shinod, shuvo007, Sin chanthoeurn, SkyMobile05, sorinm, speedteamgsm, sultansaga, sunday-unlocker, teo_mobile, thanhman18, thuandiennang, tolski, UnReality, vaez_zadeh, vin-adulf, whiteSATAN, why not bar, xseven, Yong Vannak, ysmayl, zAido_Blue, zkb, ^^^JUMPER^^^

Read more »

iPhone 3GS on iOS 6 using RedSn0w for Windows.

These are instructions on how to perform a jailbreak of your iPhone 3GS on iOS 6 using RedSn0w for Windows.

This jailbreak is untethered for old bootrom devices; however, new bootrom devices are tethered. A tethered jailbreak means you will need to connect your device to the computer each time you reboot.

Step One
Create a folder on your desktop called Pwnage

Download the latest version of RedSn0w from here and place it in the Pwnage folder. Likewise, download the 6.0 firmware from here and place it in the Pwnage folder. (Note: you do not need to download the 6.0 firmware if you are already on iOS 6.0)

Extract the RedSn0w zip file to the Pwnage folder.


Step Two:
If you haven't already updated to iOS 6 then open iTunes from your dock.


Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.


Navigate to the Pwnage folder on your desktop and select the 6.0 firmware ipsw. Click the Choose button to continue.


iTunes will now update your iPhone to the new firmware.

**Important: If you want to keep your UltraSn0w unlock then follow these instructions to update.

Step Three
Right click or control-click the redsn0w application from the redsn0w folder we extracted earlier and choose Run as administrator from the popup menu that appears.




Step Four
Once RedSn0w opens ensure your device is connected and click the Jailbreak button


Step Five
Turn OFF your device then click the Next button


Step Six
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here.


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Seven
Your iPhone will now be exploited with limera1n.


Step Eight
RedSn0w will now prepare the jailbreak data.


Step Nine
Select Cydia from the list of options and click Next.


Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.


Step Eleven
Once this is complete you will be notified that RedSn0w is done.



BOOT TETHERED
Once you have jailbroken you will need to rerun redsn0w to boot tethered only if you have a new bootrom iPhone 3GS.

Step One
From the main RedSn0w menu click the Extras button.


Step Two
Select Just boot from the Extras menu to boot tethered and follow the instructions to put your device into DFU mode again for boot.



*A big thanks is owed to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community

Read more »

How to jailbreak iOS 6 using evasi0n Step by Step.

Step 1: Download evasi0n for Mac via our http://www.evasi0n.com/ and extract the package.
Step 2: Double click the evasi0n app to run it.
Step 3: If your device has a passcode set, unlock your device and go to Settings > General > Passcode Lock > and select Turn Passcode Off.
Step 4: Plug in your iDevice to your computer. This can be any device running iOS 6.x, except for Apple TV devices.

Step 5: You should see a message on the evasi0n tool that it has detected your device. Once an eligible device is detected, the Jailbreak button will become clickable.
Step 6: Click Jailbreak, and the jailbreak process will begin.

Step 7: Several automatic steps will now be performed, including preparing jailbreak data, injecting jailbreak data, rebooting the device, uploading Cydia, and uploading the Cydia packages list. This may take a few minutes, so be patient.

Step 8: Once the steps listed in step 7 have completed, you should now see a screen asking you unlock your device. Once your device is unlocked, you should see a new app icon on your Home screen called “Jailbreak”. Tap this Jailbreak app icon just ONCE, and the screen should go black and then return to the Home screen.

Step 09: You will see more messages like injecting jb data messages, and Root Filesystem successfully remounted on the evasi0n tool.

Step 10: Once the process is completed, you will see a “Done!” message on the evasi0n tool. Your device will now reboot. Be patient for this portion, because the first boot will take longer due to performing first time setup. Be aware that the device might restart several times.

Step 11: Your iDevice will now display a large Evasi0n logo sitting on a white background. The first time, you’ll see a series of brief (sometimes very brief) messages. These messages include:

• Setting up fstab and AFC2
• Setting up Cydia
• Setting up Cydia packages
• Clearing SpringBoard Cache
• Rebooting

Again, the first set of messages on the white evasi0n background are there very briefly, blink and you might miss them. Afterwards, your device will reboot for the final time. Once your device reboots, you’ll again be presented with the white evasi0n screen with several messages. This time the messages include the following:

• Initializing offsets
• Finding offsets
• Patching kernel
• Cleaning up!
• Done! Continuing boot

After these final steps, you’ll be taken to your Lock screen, signifying that the jailbreak process is completed.

The next step is to unlock your device, swipe over to the second page of your Home screen (or further if you have lots of apps), and open Cydia. On the first load Cydia will have to initialize, so this will take a minute or two. You’ll then be taken back to the Lock screen one final time. Unlock again, open up Cydia, and choose your user type.
Congratulations, your iOS 6 device is now jailbroken!

Video tutorial

How to jailbreak iOS 6 untethered with evasi0n - iPhone - iPad - iPod touch - YouTube

Read more »

Absinthe for iDevices Jailbreak Official Versions [2.0.4]

Here you can find direct links to download Absinthe,
A tool released by the "Chronic Dev-Team" to jailbreak the iPhone, iPad, and iPod Touch.

Absinthe 2.0.4 (Win) : absinthe-win-2.0.4.zip
Absinthe 2.0.4 (Mac) : absinthe-mac-2.0.4.dmg
Absinthe 2.0.4 (Linux) : absinthe-linux-2.0.4.tar.bz2
Absinthe 2.0.2 (Win) : absinthe-win-2.0.2.zip
Absinthe 2.0.2 (Mac) : absinthe-mac-2.0.2.dmg
Absinthe 2.0.2 (Linux) : absinthe-linux-2.0.2.tar.bz2
Absinthe 2.0.1 (Win) : absinthe-win-2.0.1zip
Absinthe 2.0.1 (Mac) : absinthe-mac-2.0.1.dmg
Absinthe 2.0.1 (Linux) : absinthe-linux-2.0.1.tar.bz2
Absinthe 2.0 (Win) : absinthe-win-2.0.zip
Absinthe 2.0 (Mac) : absinthe-mac-2.0.dmg
Absinthe 2.0 (Linux) : absinthe-linux-2.0.tar.bz2

Absinthe 0.4 (Win) : absinthe-win-0.4.zip
Absinthe 0.4 (Mac) : absinthe-mac-0.4.zip
Absinthe 0.4 (Linux) : absinthe-linux-0.4.tar.gz

Absinthe 0.3 (Win) : absinthe-win-0.3.zip
Absinthe 0.3 (Mac) : absinthe-mac-0.3.zip
Absinthe 0.3 (Linux) : absinthe-linux-0.3.tar.gz
Absinthe 0.2 (Win) : absinthe-win-0.2.zip
Absinthe 0.2 (Mac) : absinthe-mac-0.2.zip
Absinthe 0.1.2-2 (Mac) : absinthe-mac-0.1.2-2.zip
Absinthe 0.1.2-1 (Mac) : absinthe-mac-0.1.2-1.zip

Read more »

iTunes Error Collection With Solution

iTuNes ErRoR CollecTion With SoluTion UpDated !
====================================
Most of the errors found at Apple's Knowledge Base.
Here is a list of iTunes errors that could appear during a restore via USB cable.

Error 1
Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.

Error -1
Error occurs when one uses the "last ditch" method for preventing baseband updates on the iPhone 4. The baseband does not get updated using this method. Use FixRecovery to kick it out of recovery mode.

Error 2
Sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. Device isn't bootable.

Error 6
Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.

Error 9
Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.
Rebooting your PC may resolve this issue. Aslo it can be connection issue.

Error 10
LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.

Error 11
Removed bbfw file in the firmware folder of an unzipped IPSW.

Error 13
Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
Error 13 may also signify a USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

Error 14
Custom firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2
USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

Error 17
Custom firmware update fail (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn't working.

Error 18
This occurs when the media library on the device is corrupt and cannot be modified or updated. Updating to the latest version of iTunes and then restoring should resolve this issue.


Error 20

Reportedly happens during failed downgrade attempts, Some have seen success afterwards by doing the downgrade from DFU mode instead of the normal Recovery mode.

Error 21
Error when using Sauriks server for a restore with iOS 5.x in the recovery mode at least on a A5 device. This error can also happen when you try to restore an iPod with hardware dfu. Use iREB r5 to solve this. or You are trying to update to a beta firmware without UDID activation.

Error 23
Baseband Communication error (Hardware), Most probably Baseband chip is faulty.

Error 26
False version of the NOR flash firmware. Use the correct sn0wbreeze version.

Error 27
modified the restore.plist so it would flash and also exchanged RestoreRamDisk and kernelcache. restore the original iOS.

Error 28
The problem is a bad dock connector on the iPhone. Must change the connector. If you have tried almost everything, reset the logic board leave uncharged for 2-3 days or remove battery for an hour. If doesn't work, the flash memory is damage .

Error 29
You might need to change the battery. See Apple discussions thread about this problem.

Error 31
DFU Loop, Sometimes during the restore with your messed-up IPSW, iTunes will return error 31. This is what's referred to as a DFU loop. The only solution is to restore a working firmware.

Error 34
Hard disk is run out of space when trying to download. Clear space and then continue downloading.

Error -35
Error when downloading songs purchased on iTunes, See Apple's KB article.

Error 37
iPod touch 2G LLB patched with the 0x24000 Segment Overflow was used on an iPhone 3GS custom firmware. Known on damaged bundles from unofficial PwnageTool distributions or bundles.

Error 40
Hacktivation bug in Sn0wbreeze, Use update one..

Error -50
Delete Storm Vedio, QuickTime, iTunes, then reinstall iTunes. See also Apple's KB article.

Error 1002
Are you restoring to a stock apple firmware or a custom pwn firmware? Either way make sure you are in DFU mode first.

Error 1004
This is caused by a failure to match the Baseband Nonce currently in memory to the Nonce returned in the BasebandFirmware SHSH blob. This is a normal part of iPhone 4 local restores via TinyUmbrella.

Error 1011
The file iTunesMobileDevice.dll is damaged or updated.

Error 1013
Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.0.2 firmware downgraded from 1.1.1)

Error 1014
This error is down to itunes not liking your USB ports on your computer. Use a different USB slot or a different computer if possible. That is the easiest fix!

Error 1015
Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.1.1 firmware downgraded from 1.1.2) Baseband firmware on the IPSW is higher than the baseband firmware on the iPad/iPhone.

Error 1050
Bad response from gs.apple.com OR need iREB for preparing the device for restoring to custom IPSW

Error 1394
When Spirit2Pwn flashes parts of the boot chain on iOS 4, the device may crash into DFU Mode.

Error 1413
Restart computer; change USB port; reinstall system. See also Apple's KB article.

Error 1415
Restart computer; change USB port; reinstall system.

Error 1417
Restart computer; change USB port; reinstall system.

Error 1418
Restart computer; change USB port; reinstall system.

Error 1428
Restart computer; change USB port; reinstall system.

Error 1600
Custom firmware can't be restored on a device with DFU Mode. Use Recovery Mode.

Error 1601
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes

Error 1602
Restart computer; change computer; reinstall system.

Error 1603
False kernelcache patch. Known on damaged bundles from unofficial PwnageTool distributions or bundles. See also Apple KB article

Error 1604
Device was not pwned (signature checks were not blocked). Custom firmware can't be restored.

Error 1611
iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.

Error 1618
Missing system files or corrupt data in iTunes installation. Try to uninstall iTunes, restart computer, install again. This error also occurs for iTunes in Windows 8 for reasons currently unknown.

Error 1619
iTunes is too old and couldn't read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.

Error 1644
IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.

Error 1646
iTunes expected the device to be in a different state (Example: booted into iOS rather than jumping to iBEC).

Error 2001
The Mac OS X kernel extension "IOUSBFamily" that was bundled with late 2008 / early 2009 MacBooks, has a bug where it fails to properly recognize an iDevice in DFU Mode. It can be resolved by updating to 10.5.7 (or later), or using a USB hub.

Error 2002
iTunes can't connect because another program is using it or it's disconnected during the Apple Server check.

Error 2003
Connection problem; change USB cable and check USB port.

Error 2005
Problem connecting. Probably a hardware failure.
Somebody reported that reinstalling the USB drivers fixed the problem.

Error 2006
Replace the USB cable with a newer one and/or disconnect all other USB devices, then retry.

Error 2009
remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore.

Error 3XXX
iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Error 3002
Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.
Error 3004
No internet connection during the firmware restore.
Error 3014
False edited hosts. The SHSH request couldn't be completed. No connection to the Apple Server, Sauriks Server or localhost.
Error 3123
Something dealing with movie rentals.
Error 3194
Right-click on QuickTimePlayer.exe choose Properties from the shortcut menu click on the Compatibility tab. Deselect the checkbox labeled “Run this program in compatibility mode for..
Error 3194
Occurs when trying to install an old firmware and Apple's server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik's Cydia server where they are backed up (or localhost if you have it yourself).
Error 3195
"An internal error occurred." Missing SHSH for the firmware. Maybe the same as "This device isn't eligible for the request build." but with an cache error.
Error -3198
Error downloading, try again. or This device isn't eligible for the requested build.
Error 3200
You are trying to update to iOS 5, when infact, the IPSW file has only a Restore Ramdisk.
Error -3259
Connection timeout, try again.
Error -5000
There is a problem with the permissions of the Mobile Application folder. The App you've tried to download in iTunes couldn't be saved.
Error 9008
Error downloading, try again.
Errors 9800
Set exact date, restart computer. See also Apple's KB article.
Error 9808
Computer system time incorrect.
Error 9812
Check system time, reset Internet connection, update root certificates.
Errors 9814
Set exact date, restart computer. See also Apple's KB article.
Errors 9815
Set exact date, restart computer. See also Apple's KB article.
Error 9843
This error happens if you are logged out, try to download something from the iTunes store and if you click on "Download" and enter an account, which doesn't have this article, this error will occur.
Error 11222
internet options Connections tab Click LAN Settings uncheck "use a proxy server"
Error 11556
You're trying to access a section or a functionality that is not available in your country, for example iCloud in some countries.
Error 13019
Seems to be an issue with syncing media to the device.It only seems to happen on jailbroken devices. Create new user, try syncing with new user's library.
Need restore the device....
Error 20000
Is caused by a custom theme pack on your Windows. Use default Theme.
Error 20008
This happened on a Mac with TinyUmbrella running before restoring a firmware to the Apple TV.
0xE8000001
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again
0xE8000022
Error in your firmware files. Restore.
0xE8008001
IPA signature verification failed.
0xE800003D
False permissions in the Carrier Bundle folder. Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.
0xE800006B
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.
0xE8000065
sn0wbreeze custom cirmware error on USB connection. Unplug the device, reboot it, and plug it in again.

----------------------
The Old thread is here

Please Note : If there anything i missed, just leave your comment here.

Read more »

iOS 6.1, 6.0, 6.0.1 Untethered Jailbreak For All iDevices

Evasi0n Jailbreak works for both Mac and Windows,
and is considered to be one of the most reliable jailbreaks by the whole community.

Download Evasi0n Jailbreak from dircet high speed links according to your device.
You can use Evad3rs Jailbreak for jailbreak, recovery fix and many more functions.
Evasi0n Jailbreak can jialbreak your iPhone, iPad and iPod touch.
Evad3rs Jailbreak is 100% risk free if you use it correctly

Jailbreak – Supported Devices:
++++++++++++++++++++++++++++++++++
* iPhone 5
* iPhone 4S
* iPhone 4
* iPhone 3GS
* iPad Mini
* iPad 4
* iPad 3
* iPad 2
* iPod Touch 4G
* iPod Touch 5G
* AppleTv 2G

jailbreak – Supported iOS versions:
+++++++++++++++++++++++++++++++++++++++
* iOS 6.1
* iOS 6.0.2
* iOS 6.0.1
* iOS 6.0

Requirements
+++++++++++++

- 5 minutes of your time!
- A computer, running Windows (XP minimum), Mac OS X (10.5 minimum) or Linux (x86 / x86_64)
- An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version)
- A USB cable to connect the device to the computer

Important! Read me!
+++++++++++++++++

1 - Make “Backup” for your iOS device using iTunes or iCloud before use the tool of EvasiOn Jailbreak. Through this advices, you will absolutely sure that your data will not be untouched by any damage.

2 - Remove password lock screen, do not put any protection foundations in your iOS so that EvasiOn Jailbreak will work without any defects or problems.

3 - Be patient when you do the jailbreak process. Don’t run iTunes or Xcode during the jailbreak process.

4 - The best thing for Jailbreak free from errors is not touching the computer in any way, so as to ensure the best results.
---------------------------------------------------------------------------------------

+++++++++++++++++++++

-----------------------------------------------------------------
For More Check Evasi0n Help Page

Read more »

evasi0n - iOS 6.x Jailbreak[External Links]

DOWNLOAD(Windows)

MIRROR 1
MIRROR 2
MEDIAFIRE
4SHARED

DOWNLOAD (MAC)

MIRROR
MIRROR
MEDIAFIRE

evasi0n - iOS 6.x Jailbreak


Compatible with all iPhone, iPod touch, iPad and iPad mini models running iOS 6.0 through 6.1

Requirements

-5 minutes of your time!
-A computer, running Windows (XP minimum), Mac OS X (10.5 minimum) or Linux (x86 / x86_64).
-An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version).
-A USB cable to connect the device to the computer.

Important! Read me!

-Backup your device using iTunes (or iCloud) before using evasi0n. If something breaks, you'll always be able to recover your data.
-lease disable the lock passcode of your iOS device before using evasi0n. It can cause issues.
-Avoid all iOS and iTunes related tasks until evasi0n is complete. Why not just enjoy a brief break from the computer to stretch your legs?.
-If the process gets stuck somewhere, it's safe to restart the program, reboot the device (if necessary by holding down Power and Home until it shuts down), and rerun the process.
-If you get an error on OS X 10.8 saying that evasi0n can't be opened, control-click (or right-click) the app and on the revealed context menu, choose ‘Open.’ On the ensuing dialogue box, choose ‘Open’ as well.

Read more »

Evasi0n iOS 6.x Untether (DL Mirrors)

https://mega.co.nz/#!d9ciUApQ!AkwevV...NTAGgjkukShihE

https://evad3rs.box.com/shared/stati...kvq7hsv0bd.zip

http://rapidshare.com/files/35031864...4f-release.zip

evasi0n-win-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.zip

https://mega.co.nz/#!IIhB3Kzb!TVS2Lg...ioqHbkwjBifae4

evasi0n-win-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.zip

Share-Online - dl/NWSZGPHMIUR

Zippyshare.com - evasi0n-win-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.zip

http://ge.tt/api/1/files/8lpcoRX/0/blob?download

Dev-Host - evasi0n-win-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.zip - The Ultimate Free File Hosting / File Sharing Service

---------- OSX ----------

https://mega.co.nz/#!5h0BwQoa!KdRLFw...saAjabY__8pNtY

https://evad3rs.box.com/shared/stati...1j4ta57hpx.dmg

http://rapidshare.com/files/30108705...4f-release.dmg

evasi0n-mac-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.dmg

evasi0n-mac-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.dmg

evasi0n-mac-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.dmg download - 2shared

Download links for evasi0n-mac-1.0-3c53ba10e2448d311b0f4157f2d7eb568f106c4f-release.dmg - Mirrorcreator - Upload files to multiple hosts

---------- Linux ----------

https://mega.co.nz/#!0kUkXBLC!Q8e53k...WJWxBuzEdkiMJo

https://evad3rs.box.com/shared/stati...k5r6ahfpg.lzma

http://rapidshare.com/files/25618288...lease.tar.lzma


---------- Cydia Offline Deb ----------

com.evad3rs.evasi0n_0.1-1_iphoneos-arm.deb/43549140

Read more »

Evasi0n Untethered Jailbreak ALL iOS 6.0.x to 6.1 Devices

Untethered Jailbreak iOS 6.0, 6.0.1, 6.0.2, 6.1 for iPhone 5, 4S, 4, 3GS and iPad Mini, 4, 3, 2 and iPod Touch 5, 4. is Almost HERE

 Evaders, an iPhone jailbreak developer team has Released that an untethered jailbreak called Evasion (they call it evasi0n). All iOS devices supported including the new Apple iPhone 5 and iPad Mini. Desktop apps for doing the untethered jailbreak are made and available for download on Windows, Mac and Linux. The only one not making to their list is the 3rd generation Apple TV.
 
Here is the list of devices supported:

• iPhone 5
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPad 4
• iPad 3
• iPad 2
• iPad mini
• iPod touch 5
• iPod touch 4
• Apple TV 2 (except third-generation)

Evaders is promising that their jailbreak tool will easy as pie and anyone and everyone would be able to jailbreak their iPhone or any other iOS devices easily.



Requirements
5 minutes of your time!
A computer, running Windows (XP minimum), Mac OS X (10.5 minimum) or Linux (x86 / x86_64)
An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version)
A USB cable to connect the device to the computer

Important! Read me!

• Backup your iOS device using iTunes or iCloud before using evasi0n. This way you are sure to never lose any data if something wrong happens.
• Please disable the lock passcode of your iOS device before using evasi0n. It can cause issues.
• Be patient while the jailbreaking process is running, don't start iTunes or Xcode in the meanwhile. The best is to not touch the computer until the end of the jailbreaking process.
• If the process gets stuck somewhere, it's safe to restart the program, reboot the device (if necessary by holding down Hold and Home until it shuts down), and rerun the process.

Download Evasi0n Untethered Jailbreak iOS 6.0, 6.0.1, 6.0.2, 6.1






SOURCE


Linux

Mac OS

Windows

Read more »

This solution only for Downgrade iOS 6 to 5.1.1

This solution only for Downgrade iOS 6 to 5.1.1 5.1 or 5.0.1, 4.3.5, 4.3.4, 4.3.3, 4.3.2, 4.3.1
Easy way with ....
tinyumbrella + iFaith + iTunes

am I tested with

How To Downgrade iOS 6.0.1 to 5.1.1 iPhone 4/3Gs & iPod 4G & Jailbreak Untethered - Windows/Mac - YouTube&fs=1" width="644" height="390">How To Downgrade iOS 6.0.1 to 5.1.1 iPhone 4/3Gs & iPod 4G & Jailbreak Untethered - Windows/Mac - YouTube&fs=1" />How To Downgrade iOS 6.0.1 to 5.1.1 iPhone 4/3Gs & iPod 4G & Jailbreak Untethered - Windows/Mac - YouTube">http://www.youtube.com/watch?v=How To Downgrade iOS 6.0.1 to 5.1.1 iPhone 4/3Gs & iPod 4G & Jailbreak Untethered - Windows/Mac - YouTube
1. iFaith-v1.4.2.exe
2.tinyumbrella-6.01.01.exe
3. iTunes

Read more »

succesfully repaired-no imei , wifi, bluetooth on 3g and 3gs

hello respected all the members of gsmhosting family , first of all i feel sorry , if somebody not like my post, but hope u all will understand .

hello friends , i made an experiment on iphone 3g , at starting the version of iphone 3g was 3.1.2, i jailbreaked it with redsn0w by selecting 4.1 , then its got hanged, then i flashed it with version 4.1(custom) and flashed ipad baseband and again i flashed it with version 4.2.1 (official) after doing this iphone comes in recovery mode then i again flashed it with 4.2.1(custom) , after that the phone goes on but it has no imei, wifi, and bletooth adress , now i have a phone without imei , wifi address and bluetooth adress


at this point i use this trick, i again flashed it with ipad baseband with redsn0w0.9.6b6, and agin restore it with custom firmware (4.2.1)

and w***** , the imei, wifi , bluetooth adress came back, and set works again fine,

at this point i think that it is done by only my luck nothing else,

then i decide to take risk with iphone 3gs , my heart beat was very fast during this experiment , but i again found success in iphone 3gs too , so i came to this conclusion


conclusion:- i found that when iphone has no imei, wifi,bletooth adress due to flashing with ipad baseband by redsn0w , it can be recovered by flashing it official baseband( 5.16 etc) , but we all know that at this time we have only option of ipad baseband (6.15) in redsn0w. so we have to tell to great redsn0w team to please add option to flash original baseband only , we know that we cant downgrade baseband , but we can update that,

so those who have lost imei ,wifi,bluetooth adress on infenion chip based iphone by flashing ipad baseband with redsn0w, they can recover their phone by flashing baseband(original) only or we can say default baseband of infenion chip

but at this time no option is available for flashing only baseband, so we have to wait untill the great great engineers made way for that,




i know some people will not like this thread , it should be fake , but friends i only share here the idea which i personally experienced , hope it helps somebody ,

i am soryy and thankful also

Read more »

Activate iphone 3gs/4 without original sim

1) Jailbreak with redsnow
2) phone will ask to activation
3) Install IEXPLORER
4) Enter to ROOT -----> Applications
5) Detele SETUP.app
6) Restart phone

NOW PHONE IS ACTIVATED !!!!

Read more »

Ultrasn0w Fixer for 6.1 to unlock iPhone 4 / 3GS - Old Basebands

Ultrasn0w Fixer for 6.1 to unlock iPhone 4 / 3GS - Old Basebands







This is not the official ultrasn0w tool that the iPhone Dev Team created. It’s a package that works with the official tool for supported basebands, those that can be unlocked by the official tool itself. This tool can be used until the official ultrasn0w is updated to unlock iOS 6.1

iOS 6 Basebands compatible with ultrasn0w fixer 6.1

Ultrasn0w supports only older basebands, if you want to preserve your iOS 6.1 baseband you need to use custom firmware with redsn0w 0.9.15b3 -- read more here.

• Baseband 01.59.00 (iPhone 4)
• Baseband 04.26.08 (iPhone 3GS)
• Baseband 05.11.07 (iPhone 3GS)
• Baseband 05.13.01 (iPhone 3GS)
• Baseband 05.12.01 (iPhone 3GS)

Unlock iOS 6.1 with ultrasn0w fixer – Guide



Step 4: Tap on the source that you entered in step 3.

Step 5: A package called ultrasn0w fixer for 6.1 will be presented to you. Tap on it to start installation.


Step 6: Download the official ultrasn0w and that’s it.

Congrats! Ultrasn0w fixer will now unlock your iPhone 3GS / iPhone 4 on iOS 6. This will do until the official ultrasn0w is updated. Do keep in mind the ultrasn0w fixer needs to be downloaded before the official tool itself.

Devices compatible with iOS 6.1 Ultrasn0w fixer

• iPhone 4
• iPhone 3GS

Read more »